90794-46905 Fuel Filter Water Separator For Yamaha 300hp
The 90794-46905 fuel filter water separator for yamaha 300hp is one of the many filters and components that are necessary to keep your outboard engine running properly. Dirt, especially from poor quality gasoline, can clog your fuel system and cause a number of problems ranging from intermittent bog down to complete engine failure. The ethanol in most modern gasolines can also gunk up fuel lines and components, while biological growth can lead to clogs. This is why it's important to change all your fuel filters on a regular basis based on factory recommended guidelines and to use a quality fuel stabilizer.
A fuel filter is located on the fuel line between your fuel tank and your engine. The fuel filter removes dirt, dust, and other particles from the fuel before it reaches the engine and can be used to replace an old or damaged filter. The best filter will have a transparent bowl that allows you to see the level of water and debris trapped inside. It should also feature a red ring that indicates when the filter needs to be changed.
To replace a fuel filter, first shut off the engine and locate the filter assembly. Carefully remove the old filter and dispose of it properly. Clean the filter housing with a lint-free cloth and install a new filter. Be sure to tighten the bolts securely. After installing the new filter, turn on the fuel valve and start the engine to check for leaks. Follow the manufacturer's instructions for reassembling the filter assembly.